Help Center/I8 Meet & Conferencing/Put a Meet media engine into maintenance and bring it back
I8 Meet & Conferencing•Last updated: 2026-10-20•2 min read

Put a Meet media engine into maintenance and bring it back

Use the Maintenance button on an engine card to stop it from being chosen, and End Maintenance to restore it.

Have questions or need step-by-step guidance on this topic?

Ask AI Copilot

Step-by-Step Procedure

1

Find the engine card

On the I8I Meet Console (/admin/meet) locate the card of the engine you want to change: "WebRTC Sovereign Mesh", "Jitsi Media Bridge" or "LiveKit Cloud SFU".

2

Start maintenance

Click "Maintenance" at the bottom left of the card. The card turns amber, its badge reads MAINTENANCE and the banner shows the server message, for example "jitsi maintenance mode set to true."

3

End maintenance

When the work is finished click "End Maintenance" on the same card. The badge returns to the engine's measured status.

💡 Pro Tip: Maintenance does not end meetings that are already running on that engine; use "Terminate" in "Live Meeting Surveillance" for that.
Expected Operational Outcome

The engine is flagged MAINTENANCE (or healthy again) and the banner confirms the change.

Troubleshooting & Failure Modes

Symptom: The button does nothing visible or shows a 403 style message
Likely Cause: Your session is not an administrative principal.
Resolution: Sign in with an administrative role and repeat the step.

Was this guide helpful?

Help us refine our platform documentation