Help Center/I8 Meet & Conferencing/Read the I8I Meet Console and run a Live Health Probe
I8 Meet & Conferencing•Last updated: 2026-10-20•3 min read

Read the I8I Meet Console and run a Live Health Probe

Open the Meet control plane, read the three media engine cards and trigger a fresh health check.

Have questions or need step-by-step guidance on this topic?

Ask AI Copilot

Step-by-Step Procedure

1

Open the console

Go to I8 Meet in the admin menu (/admin/meet). The page is titled "I8I Meet Console". It refreshes its data every 15 seconds on its own.

2

Read the engine cards

Three cards are shown: "WebRTC Sovereign Mesh", "Jitsi Media Bridge" and "LiveKit Cloud SFU". Each shows a status badge (HEALTHY, DEGRADED, UNAVAILABLE or MAINTENANCE) and the figures LATENCY, PACKET LOSS, SESSIONS and PARTICIPANTS.

💡 Pro Tip: If the engine telemetry request fails, no cards are shown and a notice reads "Engine telemetry is unavailable"; there are no sample numbers. Click "Live Health Probe" to retry.
3

Run a probe

Click "Live Health Probe" in the top right. The button reads "Probing..." while it runs. On success the banner says "Live health probe completed across all media planes." and the cards reload.

4

Read the result banner

The banner under the header shows the outcome or the error message. Close it with the "✕" button; success messages also disappear after about four seconds.

Expected Operational Outcome

You know the current status of each media engine and the cards show the result of a fresh probe.

Troubleshooting & Failure Modes

Symptom: The probe banner says "Administrator clearance is required to modify media engine routing."
Likely Cause: The probe is a write-class call and the server only accepts administrative principals.
Resolution: Sign in with an administrative role (admin, super_admin, platform_admin, genesis_architect or enterprise_admin) and try again.

Was this guide helpful?

Help us refine our platform documentation