Help Center/Plan Configurator & Compensation Models/How to suspend a plan in an emergency and lift the suspension
Plan Configurator & Compensation Models•Last updated: 2026-10-20•4 min read
How to suspend a plan in an emergency and lift the suspension
"Suspend now" stops a live plan on both events and accruals. Lifting it needs an approver, normally a different person from the suspender.
Have questions or need step-by-step guidance on this topic?
Step-by-Step Procedure
1
Open the plan with a live version
The emergency controls show only when the plan has a live version and you hold plan.suspend.
2
Suspend
Type an "emergency reason" and click "Suspend now". The state becomes SUSPENDED and the pause policy is STOP_BOTH.
3
Investigate
The reason is shown in amber on the version panel and recorded in the audit trail.
4
Lift the suspension
Open the SUSPENDED version, enter "why it is safe to resume" and click "Lift suspension". The state returns to ACTIVE.
💡 Pro Tip: Duties are separated by person: whoever helped author a version cannot approve or release it. A Super Administrator is exempt, and each use of the exemption is written to the audit trail.
Expected Operational Outcome
The plan is SUSPENDED immediately and ACTIVE again only after a reasoned lift.
Troubleshooting & Failure Modes
Symptom: Error that the suspender cannot lift the suspension
Likely Cause: Separation of duties.
Resolution: Ask another holder of plan.approve to lift it.
Was this guide helpful?
Help us refine our platform documentation