Help Center/I8 Meet & Conferencing/Start an instant meeting
I8 Meet & Conferencing•Last updated: 2026-10-20•4 min read

Start an instant meeting

Use the Start Meeting tab to set a name, size and options, then launch the room.

Have questions or need step-by-step guidance on this topic?

Ask AI Copilot

Step-by-Step Procedure

1

Open Start Meeting

Go to I8 Meet (/app/meet) and click the "Start Meeting" tab, or click "New Meeting" at the top right. From "Meet Home" you can also click a quick card: "1:1 Pair Sync" (2 seats), "Team Discussion" (10) or "Conference Stage" (50), which preset the capacity.

2

Name the meeting

Type the topic in "Meeting Name / Topic". The default is your name followed by "'s Discussion".

3

Set the capacity

Drag "Participant Capacity" between 2 and 100 seats. The "Dynamic Classification" badge updates: MICRO MEET up to 3, SMALL MEET up to 10, TEAM MEET up to 25, CONFERENCE above that. The panel on the right shows the engine target for that size.

4

Choose room type and options

Pick a "Room Type" (Instant Meet (Ephemeral), Scheduled Meet, Private (End-to-End Encrypted), Invite Only, Team Standup & Sync, Large Conference or Global Webinar). Optionally enter "Room Passcode (Optional)". Under "Engine Features" tick "Waiting Room", "Cloud Recording" and "AI Assistant" as wanted.

💡 Pro Tip: The waiting room is mandatory on the server for every room, so people always wait for you to admit them whether or not the box is ticked. Recording only works when the meeting's media provider can record.
5

Check your devices (optional)

In "Camera & Microphone Preview" click "Test Camera" to see your video and "Stop Camera" to turn it off. The "Peripherals Ready" line is a fixed label, not a live device test.

6

Launch

Click "Launch Meeting Room" (it reads "Allocating Media Engine..." while working). You are taken into the room as host. If no media provider can host it, an alert shows the reason and no room is created.

Expected Operational Outcome

You are in a live room as host and can copy the invite link or code from the top bar.

Troubleshooting & Failure Modes

Symptom: An alert says the meeting could not be initialised
Likely Cause: No media provider was able to create the room, so the meeting was not saved.
Resolution: Try again in a minute; if it persists tell an administrator to check the Meet Console engine status.

Was this guide helpful?

Help us refine our platform documentation