Admin Operations•Last updated: 2026-10-20•3 min read
How to send a real test email
Send an actual email through the real pipeline to an allowlisted (or your own) address.
Have questions or need step-by-step guidance on this topic?
Step-by-Step Procedure
1
Choose template and data
Complete steps 1 and 2 as in the render-only guide.
2
Choose the recipient
Under "3. Recipient (must be allowlisted or your own email)" pick one from "Select a permitted recipient…".
3
Click "Send real test email"
The button shows "Sending…". It is disabled until a template and recipient are selected. The environment is sent as "development".
4
Read the result
Badges show Rendered, Locally valid, Provider accepted, Provider delivered and Mailbox confirmed as Yes, No or Unknown, plus an error line and "Message ID:" when present.
Expected Operational Outcome
A real email is dispatched and the attempt is added to "Test-send history".
Troubleshooting & Failure Modes
Symptom: "This recipient is not on the test-recipient allowlist and is not your own registered email."
Likely Cause: The address is not allowed.
Resolution: Add it to the allowlist or use your own email.
Symptom: "Test-send rate limit reached (N per hour per administrator)."
Likely Cause: Too many test sends.
Resolution: Wait before sending more.
Was this guide helpful?
Help us refine our platform documentation