Help Center/NFTs & the Explorer/Configure and activate a visa type
NFTs & the Explorer•Last updated: 2026-10-20•3 min read

Configure and activate a visa type

Edit a DRAFT visa type, then activate it with a second administrator or retire an active one.

Have questions or need step-by-step guidance on this topic?

Ask AI Copilot

Step-by-Step Procedure

1

Open the "Visa Types & Rules" tab

Open "NFT & Creator Economy" then "NFT Governance" (/admin/nft-governance) and click the tab "Visa Types & Rules". Messages appear in a green or red banner under the title.

2

Select a type

In "Configure a visa type (DRAFT types only)" choose one from "select type…".

3

Edit fields

Set name, eligibility rule version, duration days, capacity, redemptions, allowed services (comma separated), the transfer policy (NON_TRANSFERABLE, HOLDER_BOUND, FOLLOWS_NFT) and "requires NFT" or "no NFT needed", then click "Save".

4

Activate

On the type card enter an "approval ref" and click "Activate". It needs an ACTIVE rule, at least one allowed service and an approver different from the author.

5

Retire

On an ACTIVE type click "Retire".

Expected Operational Outcome

The visa type shows ACTIVE or retired.

Troubleshooting & Failure Modes

Symptom: Activation refused
Likely Cause: Approver equals author, rule not ACTIVE or no allowed services.
Resolution: Have another administrator activate it after fixing the rule and services.

Was this guide helpful?

Help us refine our platform documentation